noctra/Video_Game_Mini_Maps
1
0
Fork 0
mirror of https://github.com/garagetinkering/Video_Game_Mini_Maps.git synced 2026-01-18 01:57:00 +01:00
Code Issues Packages Projects Releases Wiki Activity
Files
5647dc6e6b1dbf239aac6c1a4d6520c3b60a01bb
Video_Game_Mini_Maps/managed_components/espressif__esp_hosted/Kconfig
valentineautos 16ffc2ab10 initial commit
2025-12-05 09:22:55 +00:00

1848 lines
65 KiB
Plaintext
Raw Blame History

config ESP_HOSTED_ENABLED
bool
default y if ESP_WIFI_REMOTE_ENABLED && ESP_WIFI_REMOTE_LIBRARY_HOSTED
default n
menu "ESP-Hosted config"
depends on ESP_HOSTED_ENABLED
# Co-processor selection done in Wi-Fi Remote Component
comment "ESP32 is Slave Target from Wi-Fi Remote Component"
depends on SLAVE_IDF_TARGET_ESP32
comment "ESP32-S2 is Slave Target from Wi-Fi Remote Component"
depends on SLAVE_IDF_TARGET_ESP32S2
comment "ESP32-S3 is Slave Target from Wi-Fi Remote Component"
depends on SLAVE_IDF_TARGET_ESP32S3
comment "ESP32-C2 is Slave Target from Wi-Fi Remote Component"
depends on SLAVE_IDF_TARGET_ESP32C2
comment "ESP32-C3 is Slave Target from Wi-Fi Remote Component"
depends on SLAVE_IDF_TARGET_ESP32C3
comment "ESP32-C6 is Slave Target from Wi-Fi Remote Component"
depends on SLAVE_IDF_TARGET_ESP32C6
comment "ESP32-C5 is Slave Target from Wi-Fi Remote Component"
depends on SLAVE_IDF_TARGET_ESP32C5
comment "ESP32-C61 is Slave Target from Wi-Fi Remote Component"
depends on SLAVE_IDF_TARGET_ESP32C61
choice ESP_HOSTED_P4_DEV_BOARD
bool "Configure GPIOs for Development Board"
depends on IDF_TARGET_ESP32P4
default ESP_HOSTED_P4_DEV_BOARD_NONE
help
Sets GPIOs used for transport on these ESP32-P4 Development Boards
- ESP32-P4 Function_EV_Board with on-board ESP32-C6
- ESP32-P4 Function_EV_Board with ESP32-C5 on a EV board
- ESP32-P4 Function_EV_Board with ESP32-C2 on a EV board
- ESP32-P4-C5 Code Board with on-board ESP32-C5
Select "No development board" if you want to modify GPIOs used
config ESP_HOSTED_P4_DEV_BOARD_NONE
bool "No development board"
config ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD
depends on SLAVE_IDF_TARGET_ESP32C6 || SLAVE_IDF_TARGET_ESP32C5 || SLAVE_IDF_TARGET_ESP32C2
bool "ESP32-P4-Function-EV-Board with on-board C6 or C5/C2 on EV board"
config ESP_HOSTED_P4_C5_CORE_BOARD
depends on SLAVE_IDF_TARGET_ESP32C5
bool "ESP32-P4-C5 Core Board with on-board C5"
endchoice
# y if SDIO Transport is available, based on host and slave selection
config ESP_HOSTED_PRIV_SDIO_OPTION
bool
default y if (IDF_TARGET_ESP32 || IDF_TARGET_ESP32S3 || IDF_TARGET_ESP32P4) && (SLAVE_IDF_TARGET_ESP32 || SLAVE_IDF_TARGET_ESP32C6 || SLAVE_IDF_TARGET_ESP32C5 || SLAVE_IDF_TARGET_ESP32C61)
default n
# y if SPI HD Transport is available, based on host and slave selection
config ESP_HOSTED_PRIV_SPI_HD_OPTION
bool
default n if (IDF_TARGET_ESP32 || SLAVE_IDF_TARGET_ESP32)
default y
choice ESP_HOSTED_HOST_INTERFACE
bool "Transport layer"
default ESP_HOSTED_SDIO_HOST_INTERFACE if ESP_HOSTED_PRIV_SDIO_OPTION
default ESP_HOSTED_SPI_HOST_INTERFACE
help
Bus interface to be used for communication with the host
config ESP_HOSTED_SPI_HOST_INTERFACE
bool "SPI Full-duplex"
help
Enable/Disable SPI Full-duplex host interface
config ESP_HOSTED_SDIO_HOST_INTERFACE
depends on ESP_HOSTED_PRIV_SDIO_OPTION
bool "SDIO"
help
Enable/Disable SDIO host interface
# SPI Half Duplex is not supported in ESP32
config ESP_HOSTED_SPI_HD_HOST_INTERFACE
depends on ESP_HOSTED_PRIV_SPI_HD_OPTION
bool "SPI Half-duplex"
help
Enable/Disable SPI Half-duplex host interface
config ESP_HOSTED_UART_HOST_INTERFACE
bool "UART"
help
Enable/Disable UART host interface
endchoice
config ESP_HOSTED_IDF_SLAVE_TARGET
string
default "esp32" if SLAVE_IDF_TARGET_ESP32
default "esp32s2" if SLAVE_IDF_TARGET_ESP32S2
default "esp32s3" if SLAVE_IDF_TARGET_ESP32S3
default "esp32c2" if SLAVE_IDF_TARGET_ESP32C2
default "esp32c3" if SLAVE_IDF_TARGET_ESP32C3
default "esp32c6" if SLAVE_IDF_TARGET_ESP32C6
default "esp32c5" if SLAVE_IDF_TARGET_ESP32C5
default "esp32c61" if SLAVE_IDF_TARGET_ESP32C61
default "invalid"
menu "SPI Configuration"
depends on ESP_HOSTED_SPI_HOST_INTERFACE
choice ESP_HOSTED_SPI_PRIV_MODE_ESP32
depends on SLAVE_IDF_TARGET_ESP32
bool "Host SPI mode"
default ESP_HOSTED_SPI_PRIV_MODE_2_ESP32
config ESP_HOSTED_SPI_PRIV_MODE_0_ESP32
bool "Host SPI mode 0"
config ESP_HOSTED_SPI_PRIV_MODE_1_ESP32
bool "Host SPI mode 1"
config ESP_HOSTED_SPI_PRIV_MODE_2_ESP32
bool "Host SPI mode 2"
config ESP_HOSTED_SPI_PRIV_MODE_3_ESP32
bool "Host SPI mode 3"
endchoice
choice ESP_HOSTED_SPI_PRIV_MODE_ESP32XX
depends on !SLAVE_IDF_TARGET_ESP32
bool "Host SPI mode"
default ESP_HOSTED_SPI_PRIV_MODE_3_ESP32XX
config ESP_HOSTED_SPI_PRIV_MODE_0_ESP32XX
bool "Host SPI mode 0"
config ESP_HOSTED_SPI_PRIV_MODE_1_ESP32XX
bool "Host SPI mode 1"
config ESP_HOSTED_SPI_PRIV_MODE_2_ESP32XX
bool "Host SPI mode 2"
config ESP_HOSTED_SPI_PRIV_MODE_3_ESP32XX
bool "Host SPI mode 3"
endchoice
config ESP_HOSTED_SPI_MODE
int
default 0 if ESP_HOSTED_SPI_PRIV_MODE_0_ESP32
default 1 if ESP_HOSTED_SPI_PRIV_MODE_1_ESP32
default 2 if ESP_HOSTED_SPI_PRIV_MODE_2_ESP32
default 3 if ESP_HOSTED_SPI_PRIV_MODE_3_ESP32
default 0 if ESP_HOSTED_SPI_PRIV_MODE_0_ESP32XX
default 1 if ESP_HOSTED_SPI_PRIV_MODE_1_ESP32XX
default 2 if ESP_HOSTED_SPI_PRIV_MODE_2_ESP32XX
default 3 if ESP_HOSTED_SPI_PRIV_MODE_3_ESP32XX
choice ESP_HOSTED_SPI_CONTROLLER
bool "Host SPI controller to use"
default ESP_HOSTED_SPI_HSPI
config ESP_HOSTED_SPI_HSPI
bool "HSPI/FSPI"
help
"HSPI/FSPI: SPI_controller_1"
config ESP_HOSTED_SPI_VSPI
depends on IDF_TARGET_ESP32
bool "VSPI"
help
"VSPI: SPI_controller_2"
endchoice
config ESP_HOSTED_SPI_CONTROLLER
int
default 2 if ESP_HOSTED_SPI_VSPI
default 1
menu "Host SPI GPIOs Config"
choice ESP_HOSTED_SPI_HANDSHAKE_GPIO_CONFIG
bool "Handshake GPIO Config"
default ESP_HOSTED_HS_ACTIVE_HIGH
config ESP_HOSTED_HS_ACTIVE_HIGH
bool "HS: Active High"
config ESP_HOSTED_HS_ACTIVE_LOW
bool "HS: Active Low"
endchoice
choice ESP_HOSTED_SPI_DATAREADY__GPIO_CONFIG
bool "DataReady GPIO Config"
default ESP_HOSTED_DR_ACTIVE_HIGH
config ESP_HOSTED_DR_ACTIVE_HIGH
bool "DR: Active High"
config ESP_HOSTED_DR_ACTIVE_LOW
bool "DR: Active Low"
endchoice
choice ESP_HOSTED_SPI_RESET_GPIO_CONFIG
bool "Reset GPIO Config"
default ESP_HOSTED_SPI_RESET_ACTIVE_HIGH
help
"If Active High, High->Low->High will trigger reset (Low will trigger reset)
If Active Low, Low->High->Low will trigger reset (High will trigger reset)"
config ESP_HOSTED_SPI_RESET_ACTIVE_HIGH
bool "RESET: Active High"
config ESP_HOSTED_SPI_RESET_ACTIVE_LOW
bool "RESET: Active Low"
endchoice
config ESP_HOSTED_SPI_MOSI_RANGE_MIN
int
default 14 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 23 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 23 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 0
config ESP_HOSTED_SPI_MOSI_RANGE_MAX
int
default 14 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 23 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 23 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_HSPI_GPIO_MOSI
depends on ESP_HOSTED_SPI_HSPI
int "GPIO pin for Host MOSI"
default 8 if IDF_TARGET_ESP32P4
default 13 if IDF_TARGET_ESP32
default 11 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
default 5 if IDF_TARGET_ESP32H2
default 7
range ESP_HOSTED_SPI_MOSI_RANGE_MIN ESP_HOSTED_SPI_MOSI_RANGE_MAX
help
SPI controller Host MOSI
config ESP_HOSTED_SPI_MISO_RANGE_MIN
int
default 15 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 22 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 22 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 0
config ESP_HOSTED_SPI_MISO_RANGE_MAX
int
default 15 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 22 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 22 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_HSPI_GPIO_MISO
depends on ESP_HOSTED_SPI_HSPI
int "GPIO pin for Host MISO"
default 10 if IDF_TARGET_ESP32P4
default 12 if IDF_TARGET_ESP32
default 13 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
default 0 if IDF_TARGET_ESP32H2
default 2
range ESP_HOSTED_SPI_MISO_RANGE_MIN ESP_HOSTED_SPI_MISO_RANGE_MAX
help
SPI controller Host MISO
config ESP_HOSTED_SPI_CLK_RANGE_MIN
int
default 18 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 33 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 33 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 0
config ESP_HOSTED_SPI_CLK_RANGE_MAX
int
default 18 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 33 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 33 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_HSPI_GPIO_CLK
depends on ESP_HOSTED_SPI_HSPI
int "GPIO pin for Host CLK"
default 9 if IDF_TARGET_ESP32P4
default 14 if IDF_TARGET_ESP32
default 12 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
default 4 if IDF_TARGET_ESP32H2
default 6
range ESP_HOSTED_SPI_CLK_RANGE_MIN ESP_HOSTED_SPI_CLK_RANGE_MAX
help
SPI controller Host CLK
config ESP_HOSTED_SPI_CS_RANGE_MIN
int
default 19 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 4 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 4 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 0
config ESP_HOSTED_SPI_CS_RANGE_MAX
int
default 19 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 4 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 4 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_HSPI_GPIO_CS
depends on ESP_HOSTED_SPI_HSPI
int "GPIO pin for Host CS"
default 7 if IDF_TARGET_ESP32P4
default 15 if IDF_TARGET_ESP32
default 10 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
default 1 if IDF_TARGET_ESP32H2
default 10
range ESP_HOSTED_SPI_CS_RANGE_MIN ESP_HOSTED_SPI_CS_RANGE_MAX
help
SPI controller Host CS
config ESP_HOSTED_SPI_VSPI_GPIO_MOSI
depends on ESP_HOSTED_SPI_VSPI
int "GPIO pin for Host MOSI"
default 23
help
SPI controller Host MOSI
config ESP_HOSTED_SPI_VSPI_GPIO_MISO
depends on ESP_HOSTED_SPI_VSPI
int "GPIO pin for Host MISO"
default 19
help
SPI controller Host MISO
config ESP_HOSTED_SPI_VSPI_GPIO_CLK
depends on ESP_HOSTED_SPI_VSPI
int "GPIO pin for Host CLK"
default 18
help
SPI controller Host CLK
config ESP_HOSTED_SPI_VSPI_GPIO_CS
depends on ESP_HOSTED_SPI_VSPI
int "GPIO pin for Host CS"
default 5
help
SPI controller Host CS
config ESP_HOSTED_SPI_GPIO_MOSI
int
default ESP_HOSTED_SPI_VSPI_GPIO_MOSI if ESP_HOSTED_SPI_VSPI
default ESP_HOSTED_SPI_HSPI_GPIO_MOSI
config ESP_HOSTED_SPI_GPIO_MISO
int
default ESP_HOSTED_SPI_VSPI_GPIO_MISO if ESP_HOSTED_SPI_VSPI
default ESP_HOSTED_SPI_HSPI_GPIO_MISO
config ESP_HOSTED_SPI_GPIO_CLK
int
default ESP_HOSTED_SPI_VSPI_GPIO_CLK if ESP_HOSTED_SPI_VSPI
default ESP_HOSTED_SPI_HSPI_GPIO_CLK
config ESP_HOSTED_SPI_GPIO_CS
int
default ESP_HOSTED_SPI_VSPI_GPIO_CS if ESP_HOSTED_SPI_VSPI
default ESP_HOSTED_SPI_HSPI_GPIO_CS
config ESP_HOSTED_SPI_HANDSHAKE_RANGE_MIN
int
default 16 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 21 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 21 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 0
config ESP_HOSTED_SPI_HANDSHAKE_RANGE_MAX
int
default 16 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 21 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 21 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_GPIO_HANDSHAKE
int "GPIO pin for handshake"
default 6 if IDF_TARGET_ESP32P4
default 3 if IDF_TARGET_ESP32C2 || IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32C6
default 17 if IDF_TARGET_ESP32S3 || IDF_TARGET_ESP32S2
default 22 if IDF_TARGET_ESP32H2
default 26
range ESP_HOSTED_SPI_HANDSHAKE_RANGE_MIN ESP_HOSTED_SPI_HANDSHAKE_RANGE_MAX
help
GPIO pin to use for handshake with other spi controller
config ESP_HOSTED_SPI_DATA_READY_RANGE_MIN
int
default 17 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 32 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 32 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 0
config ESP_HOSTED_SPI_DATA_READY_RANGE_MAX
int
default 17 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 32 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 32 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_GPIO_DATA_READY
int "GPIO pin for data ready interrupt"
default 11 if IDF_TARGET_ESP32P4
default 12 if IDF_TARGET_ESP32H2
default 4
range ESP_HOSTED_SPI_DATA_READY_RANGE_MIN ESP_HOSTED_SPI_DATA_READY_RANGE_MAX
help
GPIO pin for indicating host that SPI slave has data to be read by host
config ESP_HOSTED_SPI_RESET_RANGE_MIN
int
default 54 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 53 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 53 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 0
config ESP_HOSTED_SPI_RESET_RANGE_MAX
int
default 54 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 53 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 53 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_GPIO_RESET_SLAVE
int "GPIO pin for Reseting slave ESP"
default 12 if IDF_TARGET_ESP32P4
default 10 if IDF_TARGET_ESP32H2
default 5
range ESP_HOSTED_SPI_RESET_RANGE_MIN ESP_HOSTED_SPI_RESET_RANGE_MAX
help
GPIO pin for Resetting ESP SPI slave device. Should be connected to RST/EN of ESP SPI slave device.
endmenu
ESP32XX_SPI_CLK_FREQ_RANGE_MIN := 1
ESP32_SPI_CLK_FREQ_RANGE_MAX := 10
ESP32C6_SPI_CLK_FREQ_RANGE_MAX := 40
ESP32XX_SPI_CLK_FREQ_RANGE_MAX := 40
config ESP_HOSTED_SPI_FREQ_ESP32
depends on SLAVE_IDF_TARGET_ESP32
int "SPI Clock Freq (MHz)"
default 10
range $(ESP32XX_SPI_CLK_FREQ_RANGE_MIN) $(ESP32_SPI_CLK_FREQ_RANGE_MAX)
help
"Optimize SPI CLK by increasing till host practically can support"
config ESP_HOSTED_SPI_FREQ_ESP32C6
depends on SLAVE_IDF_TARGET_ESP32C6
int "SPI Clock Freq (MHz)"
default 40 if IDF_TARGET_ESP32P4 #config for ESP32-P4 Function_EV_Board
default 26
range $(ESP32XX_SPI_CLK_FREQ_RANGE_MIN) $(ESP32C6_SPI_CLK_FREQ_RANGE_MAX)
help
"Optimize SPI CLK by increasing till host practically can support"
config ESP_HOSTED_SPI_FREQ_ESP32XX
depends on SLAVE_IDF_TARGET_ESP32C2 || SLAVE_IDF_TARGET_ESP32C3 || SLAVE_IDF_TARGET_ESP32S2 || SLAVE_IDF_TARGET_ESP32S3 || SLAVE_IDF_TARGET_ESP32C5 || SLAVE_IDF_TARGET_ESP32C61
int "SPI Clock Freq"
default 40 if SLAVE_IDF_TARGET_ESP32C2 || SLAVE_IDF_TARGET_ESP32C3 || SLAVE_IDF_TARGET_ESP32S2 || SLAVE_IDF_TARGET_ESP32S3 || SLAVE_IDF_TARGET_ESP32C5 || SLAVE_IDF_TARGET_ESP32C61
range $(ESP32XX_SPI_CLK_FREQ_RANGE_MIN) $(ESP32XX_SPI_CLK_FREQ_RANGE_MAX)
help
"Optimize SPI CLK by increasing till host practically can support"
config ESP_HOSTED_SPI_CLK_FREQ
int
default ESP_HOSTED_SPI_FREQ_ESP32 if SLAVE_IDF_TARGET_ESP32
default ESP_HOSTED_SPI_FREQ_ESP32C6 if SLAVE_IDF_TARGET_ESP32C6
default ESP_HOSTED_SPI_FREQ_ESP32XX if SLAVE_IDF_TARGET_ESP32C2 || SLAVE_IDF_TARGET_ESP32C3 || SLAVE_IDF_TARGET_ESP32S2 || SLAVE_IDF_TARGET_ESP32S3 || SLAVE_IDF_TARGET_ESP32C5 || SLAVE_IDF_TARGET_ESP32C61
help
"Optimize SPI CLK by increasing till host practically can support"
config ESP_HOSTED_SPI_TX_Q_SIZE
int "ESP to Host SPI queue size"
default 20
help
Very small tx queue will lower ESP -- SPI --> Host data rate
config ESP_HOSTED_SPI_RX_Q_SIZE
int "Host to ESP SPI queue size"
default 20
help
Very small RX queue will lower ESP <-- SPI -- Host data rate
endmenu
menu "Hosted SDIO Configuration"
depends on ESP_HOSTED_SDIO_HOST_INTERFACE
choice ESP_HOSTED_SDIO_RESET_GPIO_CONFIG
bool "RESET GPIO Config"
default ESP_HOSTED_SDIO_RESET_ACTIVE_HIGH
help
"If Active High, High->Low->High will trigger reset (Low will trigger reset)
If Active Low, Low->High->Low will trigger reset (High will trigger reset)"
config ESP_HOSTED_SDIO_RESET_ACTIVE_HIGH
bool "RESET: Active High"
config ESP_HOSTED_SDIO_RESET_ACTIVE_LOW
bool "RESET: Active Low"
endchoice
choice ESP_HOSTED_SDIO_RX_OPTIMIZATION
bool "SDIO Receive Optimization"
default ESP_HOSTED_SDIO_OPTIMIZATION_RX_STREAMING_MODE
config ESP_HOSTED_SDIO_OPTIMIZATION_RX_NONE
bool "No optimization"
help
Use SDIO as is, with no optimizations.
config ESP_HOSTED_SDIO_OPTIMIZATION_RX_MAX_SIZE
bool "Always Rx Max Packet size"
help
Always read max Rx Packet Size (512 * 3 bytes). This saves one SDIO
transaction (get Rx Packet Size) when reading data from slave by
always transferring a fixed amount of data. Extra data at end of valid
packet data is discarded.
config ESP_HOSTED_SDIO_OPTIMIZATION_RX_STREAMING_MODE
bool "Use Streaming Mode"
help
Receive a stream of queued data from the slave, made up of one or more
packets of data. Host extracts packets from the stream. This improves
SDIO read performance by doing one large read transaction instead of
many smaller read transactions for each packet.
(Note: requires slave to support streaming mode.)
endchoice
choice
prompt "SDIO Slot To Use"
default ESP_HOSTED_SDIO_SLOT_1
help
On the ESP32-P4 EV Board:
- Slot 0 connects to the MicroSD Card slot
- Slot 1 connects to the on-board ESP32-C6
For the ESP32, Slot 0 is usually occupied by SPI Flash and not usable for SDIO.
For the ESP32-P4, Slot 0 is IOMUXed and GPIO values cannot be changed
config ESP_HOSTED_SDIO_SLOT_0
depends on IDF_TARGET_ESP32P4 || IDF_TARGET_ESP32S3
bool "Slot 0"
config ESP_HOSTED_SDIO_SLOT_1
bool "Slot 1"
endchoice
config ESP_HOSTED_SDIO_SLOT
int
default 0 if ESP_HOSTED_SDIO_SLOT_0
default 1 if ESP_HOSTED_SDIO_SLOT_1
config ESP_HOSTED_SD_PWR_CTRL_LDO_INTERNAL_IO
depends on SOC_SDMMC_IO_POWER_EXTERNAL
bool "SDIO power supply comes from internal LDO IO (READ HELP!)"
default n
help
Only needed when the SDIO module is connected to specific IO pins which can be used for high-speed SDIO.
Please read the schematic first and check if the SD VDD is connected to any internal LDO output.
Unselect this option if the SDIO is powered by an external power supply.
For ESP32-P4 EV Board, SDMMC slot 0 may require internal LDO output.
config ESP_HOSTED_SD_PWR_CTRL_LDO_IO_ID
depends on SOC_SDMMC_IO_POWER_EXTERNAL && ESP_HOSTED_SD_PWR_CTRL_LDO_INTERNAL_IO
int "LDO ID"
default 4 if IDF_TARGET_ESP32P4
help
Please check your schematic first and input your LDO ID.
choice
prompt "SDIO Bus Width"
default ESP_HOSTED_SDIO_4_BIT_BUS
help
Select the SDIO Bus Width to use
config ESP_HOSTED_SDIO_4_BIT_BUS
bool "4 Bits"
config ESP_HOSTED_SDIO_1_BIT_BUS
bool "1 Bit"
endchoice
config ESP_HOSTED_SDIO_BUS_WIDTH
int
default 1 if ESP_HOSTED_SDIO_1_BIT_BUS
default 4
ESP32_SDIO_CLK_FREQ_KHZ_RANGE_MIN := 400
ESP32_SDIO_CLK_FREQ_KHZ_RANGE_MAX := 40000
ESP32XX_SDIO_CLK_FREQ_KHZ_RANGE_MIN := 400
ESP32XX_SDIO_CLK_FREQ_KHZ_RANGE_MAX := 50000
config ESP_HOSTED_SDIO_CLOCK_FREQ_KHZ
int "SDIO Clock Freq (in kHz)"
default 40000
range $(ESP32_SDIO_CLK_FREQ_KHZ_RANGE_MIN) $(ESP32_SDIO_CLK_FREQ_KHZ_RANGE_MAX) if IDF_TARGET_ESP32
range $(ESP32XX_SDIO_CLK_FREQ_KHZ_RANGE_MIN) $(ESP32XX_SDIO_CLK_FREQ_KHZ_RANGE_MAX) if IDF_TARGET_ESP32S3 || IDF_TARGET_ESP32P4
help
"Optimize SDIO CLK by increasing till host practically can support. Clock frequency for ESP32-P4 as host <= 40MHz"
config ESP_HOSTED_SDIO_CMD_GPIO_RANGE_MIN
int
default 51 if ESP_HOSTED_P4_C5_CORE_BOARD
default 19 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 4 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 15 if IDF_TARGET_ESP32
default 0
config ESP_HOSTED_SDIO_CMD_GPIO_RANGE_MAX
int
default 51 if ESP_HOSTED_P4_C5_CORE_BOARD
default 19 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 4 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 15 if IDF_TARGET_ESP32
default 100
config ESP_HOSTED_SDIO_CLK_GPIO_RANGE_MIN
int
default 50 if ESP_HOSTED_P4_C5_CORE_BOARD
default 18 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 33 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 14 if IDF_TARGET_ESP32
default 0
config ESP_HOSTED_SDIO_CLK_GPIO_RANGE_MAX
int
default 50 if ESP_HOSTED_P4_C5_CORE_BOARD
default 18 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 33 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 14 if IDF_TARGET_ESP32
default 100
config ESP_HOSTED_SDIO_D0_GPIO_RANGE_MIN
int
default 49 if ESP_HOSTED_P4_C5_CORE_BOARD
default 14 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 20 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 2 if IDF_TARGET_ESP32
default 0
config ESP_HOSTED_SDIO_D0_GPIO_RANGE_MAX
int
default 49 if ESP_HOSTED_P4_C5_CORE_BOARD
default 14 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 20 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 2 if IDF_TARGET_ESP32
default 100
config ESP_HOSTED_SDIO_D1_GPIO_RANGE_MIN
int
default 48 if ESP_HOSTED_P4_C5_CORE_BOARD
default 15 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 23 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 4 if IDF_TARGET_ESP32
default 0
config ESP_HOSTED_SDIO_D1_GPIO_RANGE_MAX
int
default 48 if ESP_HOSTED_P4_C5_CORE_BOARD
default 15 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 23 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 4 if IDF_TARGET_ESP32
default 100
config ESP_HOSTED_SDIO_D2_GPIO_RANGE_MIN
int
default 53 if ESP_HOSTED_P4_C5_CORE_BOARD
default 16 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 21 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 12 if IDF_TARGET_ESP32
default 0
config ESP_HOSTED_SDIO_D2_GPIO_RANGE_MAX
int
default 53 if ESP_HOSTED_P4_C5_CORE_BOARD
default 16 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 21 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 12 if IDF_TARGET_ESP32
default 100
config ESP_HOSTED_SDIO_D3_GPIO_RANGE_MIN
int
default 52 if ESP_HOSTED_P4_C5_CORE_BOARD
default 17 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 22 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 13 if IDF_TARGET_ESP32
default 0
config ESP_HOSTED_SDIO_D3_GPIO_RANGE_MAX
int
default 52 if ESP_HOSTED_P4_C5_CORE_BOARD
default 17 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 22 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 13 if IDF_TARGET_ESP32
default 100
config ESP_HOSTED_SDIO_RESET_SLAVE_GPIO_MIN
int
default 54 if ESP_HOSTED_P4_C5_CORE_BOARD
default 54 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 53 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 5 if IDF_TARGET_ESP32
default 0
help
GPIO pin for Resetting ESP SDIO slave device. Should be connected to RST/EN of ESP SDIO slave device.
config ESP_HOSTED_SDIO_RESET_SLAVE_GPIO_MAX
int
default 54 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 53 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 5 if IDF_TARGET_ESP32
default 100
### *START* GPIO SDIO pin configurations for Slot 0 and 1
config ESP_HOSTED_PRIV_SDIO_PIN_CMD_SLOT_0
depends on ESP_HOSTED_SDIO_SLOT_0
int "CMD GPIO number"
default 47 if IDF_TARGET_ESP32S3
range 44 44 if IDF_TARGET_ESP32P4
range 15 15 if IDF_TARGET_ESP32
help
"Value can only be configured for some targets. Displayed always for reference."
config ESP_HOSTED_PRIV_SDIO_PIN_CMD_SLOT_1
depends on ESP_HOSTED_SDIO_SLOT_1
int "CMD GPIO number"
default 47 if IDF_TARGET_ESP32S3
default 19 if IDF_TARGET_ESP32P4
default 15 if IDF_TARGET_ESP32
range ESP_HOSTED_SDIO_CMD_GPIO_RANGE_MIN ESP_HOSTED_SDIO_CMD_GPIO_RANGE_MAX
help
CMD GPIO pin for SDIO. Range enforced dynamically based on slave target to ensure IOMUX compliance.
config ESP_HOSTED_PRIV_SDIO_PIN_CLK_SLOT_0
depends on ESP_HOSTED_SDIO_SLOT_0
int "CLK GPIO number"
default 19 if IDF_TARGET_ESP32S3
range 43 43 if IDF_TARGET_ESP32P4
range 14 14 if IDF_TARGET_ESP32
help
"Value can only be configured for some targets. Displayed always for reference."
config ESP_HOSTED_PRIV_SDIO_PIN_CLK_SLOT_1
depends on ESP_HOSTED_SDIO_SLOT_1
int "CLK GPIO number"
default 19 if IDF_TARGET_ESP32S3
default 18 if IDF_TARGET_ESP32P4
default 14 if IDF_TARGET_ESP32
range ESP_HOSTED_SDIO_CLK_GPIO_RANGE_MIN ESP_HOSTED_SDIO_CLK_GPIO_RANGE_MAX
help
CLK GPIO pin for SDIO. Range enforced dynamically based on slave target to ensure IOMUX compliance.
config ESP_HOSTED_PRIV_SDIO_PIN_D0_SLOT_0
depends on ESP_HOSTED_SDIO_SLOT_0
int "D0 GPIO number"
default 13 if IDF_TARGET_ESP32S3
range 39 39 if IDF_TARGET_ESP32P4
range 2 2 if IDF_TARGET_ESP32
help
"Value can only be configured for some targets. Displayed always for reference."
config ESP_HOSTED_PRIV_SDIO_PIN_D0_SLOT_1
depends on ESP_HOSTED_SDIO_SLOT_1
int "D0 GPIO number"
default 13 if IDF_TARGET_ESP32S3
default 14 if IDF_TARGET_ESP32P4
default 2 if IDF_TARGET_ESP32
range ESP_HOSTED_SDIO_D0_GPIO_RANGE_MIN ESP_HOSTED_SDIO_D0_GPIO_RANGE_MAX
help
D0 GPIO pin for SDIO. Range enforced dynamically based on slave target to ensure IOMUX compliance.
if ESP_HOSTED_SDIO_4_BIT_BUS
config ESP_HOSTED_PRIV_SDIO_PIN_D1_4BIT_BUS_SLOT_0
depends on ESP_HOSTED_SDIO_SLOT_0
int "D1 GPIO number"
default 35 if IDF_TARGET_ESP32S3
range 40 40 if IDF_TARGET_ESP32P4
range 4 4 if IDF_TARGET_ESP32
help
"Value can only be configured for some targets. Displayed always for reference."
config ESP_HOSTED_PRIV_SDIO_PIN_D1_4BIT_BUS_SLOT_1
depends on ESP_HOSTED_SDIO_SLOT_1
int "D1 GPIO number"
default 35 if IDF_TARGET_ESP32S3
default 15 if IDF_TARGET_ESP32P4
default 4 if IDF_TARGET_ESP32
range ESP_HOSTED_SDIO_D1_GPIO_RANGE_MIN ESP_HOSTED_SDIO_D1_GPIO_RANGE_MAX
help
D1 GPIO pin for SDIO. Range enforced dynamically based on slave target to ensure IOMUX compliance.
config ESP_HOSTED_PRIV_SDIO_PIN_D2_4BIT_BUS_SLOT_0
depends on ESP_HOSTED_SDIO_SLOT_0
int "D2 GPIO number"
default 20 if IDF_TARGET_ESP32S3
range 41 41 if IDF_TARGET_ESP32P4
range 12 12 if IDF_TARGET_ESP32
help
"Value can only be configured for some targets. Displayed always for reference."
config ESP_HOSTED_PRIV_SDIO_PIN_D2_4BIT_BUS_SLOT_1
depends on ESP_HOSTED_SDIO_SLOT_1
int "D2 GPIO number"
default 20 if IDF_TARGET_ESP32S3
default 16 if IDF_TARGET_ESP32P4
default 12 if IDF_TARGET_ESP32
range ESP_HOSTED_SDIO_D2_GPIO_RANGE_MIN ESP_HOSTED_SDIO_D2_GPIO_RANGE_MAX
help
D2 GPIO pin for SDIO. Range enforced dynamically based on slave target to ensure IOMUX compliance.
config ESP_HOSTED_PRIV_SDIO_PIN_D3_4BIT_BUS_SLOT_0
depends on ESP_HOSTED_SDIO_SLOT_0
int "D3 GPIO number"
default 9 if IDF_TARGET_ESP32S3
range 42 42 if IDF_TARGET_ESP32P4
range 13 13 if IDF_TARGET_ESP32
help
"Value can only be configured for some targets. Displayed always for reference."
config ESP_HOSTED_PRIV_SDIO_PIN_D3_4BIT_BUS_SLOT_1
depends on ESP_HOSTED_SDIO_SLOT_1
int "D3 GPIO number"
default 9 if IDF_TARGET_ESP32S3
default 17 if IDF_TARGET_ESP32P4
default 13 if IDF_TARGET_ESP32
range ESP_HOSTED_SDIO_D3_GPIO_RANGE_MIN ESP_HOSTED_SDIO_D3_GPIO_RANGE_MAX
help
D3 GPIO pin for SDIO. Range enforced dynamically based on slave target to ensure IOMUX compliance.
endif
if !ESP_HOSTED_SDIO_4_BIT_BUS
config ESP_HOSTED_PRIV_SDIO_PIN_D1_1BIT_BUS_SLOT_0
depends on ESP_HOSTED_SDIO_SLOT_0
int "D1 GPIO number (Interrupt Line)"
default 35 if IDF_TARGET_ESP32S3
range 40 40 if IDF_TARGET_ESP32P4
range 4 4 if IDF_TARGET_ESP32
help
"Value can only be configured for some targets. Displayed always for reference."
config ESP_HOSTED_PRIV_SDIO_PIN_D1_1BIT_BUS_SLOT_1
depends on ESP_HOSTED_SDIO_SLOT_1
int "D1 GPIO number (Interrupt Line)"
default 35 if IDF_TARGET_ESP32S3
default 15 if IDF_TARGET_ESP32P4
default 4 if IDF_TARGET_ESP32
range ESP_HOSTED_SDIO_D1_GPIO_RANGE_MIN ESP_HOSTED_SDIO_D1_GPIO_RANGE_MAX
help
D1 GPIO pin for SDIO. Range enforced dynamically based on slave target to ensure IOMUX compliance.
endif
config ESP_HOSTED_SDIO_GPIO_RESET_SLAVE
int "GPIO pin for Reseting slave ESP"
default 54 if IDF_TARGET_ESP32P4
default 42 if IDF_TARGET_ESP32S3
default 5 if IDF_TARGET_ESP32
range ESP_HOSTED_SDIO_RESET_SLAVE_GPIO_MIN ESP_HOSTED_SDIO_RESET_SLAVE_GPIO_MAX
help
GPIO pin for Resetting ESP SDIO slave device. Should be connected to RST/EN of ESP SDIO slave device.
### *END* GPIO SDIO pin configurations for Slot 0 and 1
config ESP_HOSTED_SDIO_PIN_CMD
int
default ESP_HOSTED_PRIV_SDIO_PIN_CMD_SLOT_0 if ESP_HOSTED_SDIO_SLOT_0
default ESP_HOSTED_PRIV_SDIO_PIN_CMD_SLOT_1 if ESP_HOSTED_SDIO_SLOT_1
config ESP_HOSTED_SDIO_PIN_CLK
int
default ESP_HOSTED_PRIV_SDIO_PIN_CLK_SLOT_0 if ESP_HOSTED_SDIO_SLOT_0
default ESP_HOSTED_PRIV_SDIO_PIN_CLK_SLOT_1 if ESP_HOSTED_SDIO_SLOT_1
config ESP_HOSTED_SDIO_PIN_D0
int
default ESP_HOSTED_PRIV_SDIO_PIN_D0_SLOT_0 if ESP_HOSTED_SDIO_SLOT_0
default ESP_HOSTED_PRIV_SDIO_PIN_D0_SLOT_1 if ESP_HOSTED_SDIO_SLOT_1
if ESP_HOSTED_SDIO_4_BIT_BUS
config ESP_HOSTED_SDIO_PRIV_PIN_D1_4BIT_BUS
int
default ESP_HOSTED_PRIV_SDIO_PIN_D1_4BIT_BUS_SLOT_0 if ESP_HOSTED_SDIO_SLOT_0
default ESP_HOSTED_PRIV_SDIO_PIN_D1_4BIT_BUS_SLOT_1 if ESP_HOSTED_SDIO_SLOT_1
config ESP_HOSTED_SDIO_PIN_D2
int
default ESP_HOSTED_PRIV_SDIO_PIN_D2_4BIT_BUS_SLOT_0 if ESP_HOSTED_SDIO_SLOT_0
default ESP_HOSTED_PRIV_SDIO_PIN_D2_4BIT_BUS_SLOT_1 if ESP_HOSTED_SDIO_SLOT_1
config ESP_HOSTED_SDIO_PIN_D3
int
default ESP_HOSTED_PRIV_SDIO_PIN_D3_4BIT_BUS_SLOT_0 if ESP_HOSTED_SDIO_SLOT_0
default ESP_HOSTED_PRIV_SDIO_PIN_D3_4BIT_BUS_SLOT_1 if ESP_HOSTED_SDIO_SLOT_1
endif
if !ESP_HOSTED_SDIO_4_BIT_BUS
config ESP_HOSTED_SDIO_PRIV_PIN_D1_1BIT_BUS
int
default ESP_HOSTED_PRIV_SDIO_PIN_D1_1BIT_BUS_SLOT_0 if ESP_HOSTED_SDIO_SLOT_0
default ESP_HOSTED_PRIV_SDIO_PIN_D1_1BIT_BUS_SLOT_1 if ESP_HOSTED_SDIO_SLOT_1
endif
config ESP_HOSTED_SDIO_PIN_D1
int
default ESP_HOSTED_SDIO_PRIV_PIN_D1_4BIT_BUS if ESP_HOSTED_SDIO_4_BIT_BUS
default ESP_HOSTED_SDIO_PRIV_PIN_D1_1BIT_BUS if !ESP_HOSTED_SDIO_4_BIT_BUS
config ESP_HOSTED_SDIO_TX_Q_SIZE
int "Host SDIO Tx queue size"
default 20
help
Very small tx queue will lower data rate
config ESP_HOSTED_SDIO_RX_Q_SIZE
int "Host SDIO Rx queue size"
default 20
help
Very small RX queue will lower data rate
config ESP_HOSTED_SDIO_RESET_DELAY_MS
int "Delay (in ms) after Co-processor Reset"
default 1500
help
The co-processor needs some time to be ready after being reset by the host.
Increase this value if host sees SDMMC errors after resetting the co-processor.
config ESP_HOSTED_SDIO_CHECKSUM
bool "SDIO checksum ENABLE/DISABLE"
help
ENABLE/DISABLE software SDIO checksum
endmenu
menu "SPI Half-duplex Configuration"
depends on ESP_HOSTED_SPI_HD_HOST_INTERFACE
config ESP_HOSTED_SPI_HD_MODE
int "SPI Mode to use"
default 3
range 0 3
help
SPI Mode to use. The same mode must be used on both host and slave.
choice ESP_HOSTED_SPI_HD_PRIV_INTERFACE_NUM_DATA_LINES
bool "Num Data Lines to use"
default ESP_HOSTED_SPI_HD_PRIV_INTERFACE_4_DATA_LINES
help
Number of Data Lines to use in the SPI HD interface
config ESP_HOSTED_SPI_HD_PRIV_INTERFACE_4_DATA_LINES
bool "4 data lines"
config ESP_HOSTED_SPI_HD_PRIV_INTERFACE_2_DATA_LINES
bool "2 data lines"
endchoice
config ESP_HOSTED_SPI_HD_INTERFACE_NUM_DATA_LINES
int
default 4 if ESP_HOSTED_SPI_HD_PRIV_INTERFACE_4_DATA_LINES
default 2 if ESP_HOSTED_SPI_HD_PRIV_INTERFACE_2_DATA_LINES
choice ESP_HOSTED_SPI_HD_RESET_GPIO_CONFIG
bool "RESET GPIO Config"
default ESP_HOSTED_SPI_HD_RESET_ACTIVE_HIGH
help
"If Active High, High->Low->High will trigger reset (Low will trigger reset)
If Active Low, Low->High->Low will trigger reset (High will trigger reset)"
config ESP_HOSTED_SPI_HD_RESET_ACTIVE_HIGH
bool "RESET: Active High"
config ESP_HOSTED_SPI_HD_RESET_ACTIVE_LOW
bool "RESET: Active Low"
endchoice
choice ESP_HOSTED_SPI_HD_DATAREADY_GPIO_CONFIG
bool "DataReady GPIO Config"
default ESP_HOSTED_SPI_HD_DR_ACTIVE_HIGH
config ESP_HOSTED_SPI_HD_DR_ACTIVE_HIGH
bool "DR: Active High"
config ESP_HOSTED_SPI_HD_DR_ACTIVE_LOW
bool "DR: Active Low"
endchoice
menu "Host GPIOs Config"
config ESP_HOSTED_SPI_HD_CS_RANGE_MIN
int
default 19 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 4 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 4 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default -1
config ESP_HOSTED_SPI_HD_CS_RANGE_MAX
int
default 19 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 4 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 4 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_HD_GPIO_CS
int "GPIO pin for Host CS"
default 7 if IDF_TARGET_ESP32P4
default 10 if IDF_TARGET_ESP32S3
default 1 if IDF_TARGET_ESP32H2
default -1 if !IDF_TARGET_ESP32P4 || !IDF_TARGET_ESP32H2 || !IDF_TARGET_ESP32S3
range ESP_HOSTED_SPI_HD_CS_RANGE_MIN ESP_HOSTED_SPI_HD_CS_RANGE_MAX
help
SPI Half-duplex controller Host CS
config ESP_HOSTED_SPI_HD_CLK_RANGE_MIN
int
default 18 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 33 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 33 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default -1
config ESP_HOSTED_SPI_HD_CLK_RANGE_MAX
int
default 18 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 33 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 33 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_HD_GPIO_CLK
int "GPIO pin for Host CLK"
default 9 if IDF_TARGET_ESP32P4
default 12 if IDF_TARGET_ESP32S3
default 4 if IDF_TARGET_ESP32H2
default -1 if !IDF_TARGET_ESP32P4 || !IDF_TARGET_ESP32H2 || !IDF_TARGET_ESP32S3
range ESP_HOSTED_SPI_HD_CLK_RANGE_MIN ESP_HOSTED_SPI_HD_CLK_RANGE_MAX
help
SPI Half-duplex controller Host CLK
config ESP_HOSTED_SPI_HD_D0_RANGE_MIN
int
default 14 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 23 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 23 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default -1
config ESP_HOSTED_SPI_HD_D0_RANGE_MAX
int
default 14 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 23 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 23 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_HD_GPIO_D0
int "GPIO pin for Host D0"
default 8 if IDF_TARGET_ESP32P4
default 11 if IDF_TARGET_ESP32S3
default 5 if IDF_TARGET_ESP32H2
default -1 if !IDF_TARGET_ESP32P4 || !IDF_TARGET_ESP32H2 || !IDF_TARGET_ESP32S3
range ESP_HOSTED_SPI_HD_D0_RANGE_MIN ESP_HOSTED_SPI_HD_D0_RANGE_MAX
help
SPI Half-duplex controller Host D0
config ESP_HOSTED_SPI_HD_D1_RANGE_MIN
int
default 15 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 22 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 22 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default -1
config ESP_HOSTED_SPI_HD_D1_RANGE_MAX
int
default 15 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 22 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 22 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_HD_GPIO_D1
int "GPIO pin for Host D1"
default 10 if IDF_TARGET_ESP32P4
default 13 if IDF_TARGET_ESP32S3
default 0 if IDF_TARGET_ESP32H2
default -1 if !IDF_TARGET_ESP32P4 || !IDF_TARGET_ESP32H2 || !IDF_TARGET_ESP32S3
range ESP_HOSTED_SPI_HD_D1_RANGE_MIN ESP_HOSTED_SPI_HD_D1_RANGE_MAX
help
SPI Half-duplex controller Host D1
config ESP_HOSTED_SPI_HD_D2_RANGE_MIN
int
default 16 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 20 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 20 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default -1
config ESP_HOSTED_SPI_HD_D2_RANGE_MAX
int
default 16 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 20 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 20 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_HD_GPIO_D2
depends on ESP_HOSTED_SPI_HD_PRIV_INTERFACE_4_DATA_LINES
int "GPIO pin for Host D2"
default 11 if IDF_TARGET_ESP32P4
default 14 if IDF_TARGET_ESP32S3
default 2 if IDF_TARGET_ESP32H2
default -1 if !IDF_TARGET_ESP32P4 || !IDF_TARGET_ESP32H2 || !IDF_TARGET_ESP32S3
range ESP_HOSTED_SPI_HD_D2_RANGE_MIN ESP_HOSTED_SPI_HD_D2_RANGE_MAX
help
SPI Half-duplex controller Host D2
config ESP_HOSTED_SPI_HD_D3_RANGE_MIN
int
default 17 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 21 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 21 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default -1
config ESP_HOSTED_SPI_HD_D3_RANGE_MAX
int
default 17 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 21 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 21 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_HD_GPIO_D3
depends on ESP_HOSTED_SPI_HD_PRIV_INTERFACE_4_DATA_LINES
int "GPIO pin for Host D3"
default 6 if IDF_TARGET_ESP32P4
default 9 if IDF_TARGET_ESP32S3
default 3 if IDF_TARGET_ESP32H2
default -1 if !IDF_TARGET_ESP32P4 || !IDF_TARGET_ESP32H2 || !IDF_TARGET_ESP32S3
range ESP_HOSTED_SPI_HD_D3_RANGE_MIN ESP_HOSTED_SPI_HD_D3_RANGE_MAX
help
SPI Half-duplex controller Host D3
config ESP_HOSTED_SPI_HD_DATA_READY_RANGE_MIN
int
default 6 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 32 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 32 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default -1
config ESP_HOSTED_SPI_HD_DATA_READY_RANGE_MAX
int
default 6 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 32 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 32 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_HD_GPIO_DATA_READY
int "GPIO pin for data ready interrupt"
default 13 if IDF_TARGET_ESP32P4
default 4 if IDF_TARGET_ESP32S3
default 12 if IDF_TARGET_ESP32H2
default -1 if !IDF_TARGET_ESP32P4 || !IDF_TARGET_ESP32H2 || !IDF_TARGET_ESP32S3
range ESP_HOSTED_SPI_HD_DATA_READY_RANGE_MIN ESP_HOSTED_SPI_HD_DATA_READY_RANGE_MAX
help
GPIO pin for indicating host that slave has data to be read by host
config ESP_HOSTED_SPI_HD_RESET_RANGE_MIN
int
default 54 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 53 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 53 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default -1
config ESP_HOSTED_SPI_HD_RESET_RANGE_MAX
int
default 54 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 53 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C5
default 53 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C2
default 100
config ESP_HOSTED_SPI_HD_GPIO_RESET_SLAVE
int "GPIO pin for Reseting slave ESP"
default 12 if IDF_TARGET_ESP32P4
default 5 if IDF_TARGET_ESP32S3
default 10 if IDF_TARGET_ESP32H2
default -1 if !IDF_TARGET_ESP32P4 || !IDF_TARGET_ESP32H2 || !IDF_TARGET_ESP32S3
range ESP_HOSTED_SPI_HD_RESET_RANGE_MIN ESP_HOSTED_SPI_HD_RESET_RANGE_MAX
help
GPIO pin for Resetting ESP slave device. Should be connected to RST/EN of ESP SPI slave device.
endmenu
ESP32XX_SPI_HD_CLK_FREQ_RANGE_MIN := 1
ESP32_SPI_HD_CLK_FREQ_RANGE_MAX := 10
ESP32C6_SPI_HD_CLK_FREQ_RANGE_MAX := 40
ESP32XX_SPI_HD_CLK_FREQ_RANGE_MAX := 40
config ESP_HOSTED_SPI_HD_FREQ_ESP32C6
depends on SLAVE_IDF_TARGET_ESP32C6
int "SPI HD Clock Freq (MHz)"
default 40 if IDF_TARGET_ESP32P4 #config for ESP32-P4 Function_EV_Board
default 10
range $(ESP32XX_SPI_HD_CLK_FREQ_RANGE_MIN) $(ESP32C6_SPI_HD_CLK_FREQ_RANGE_MAX)
help
"Optimize CLK by increasing till host practically can support"
config ESP_HOSTED_SPI_HD_FREQ_ESP32XX
depends on SLAVE_IDF_TARGET_ESP32C2 || SLAVE_IDF_TARGET_ESP32C3 || SLAVE_IDF_TARGET_ESP32S2 || SLAVE_IDF_TARGET_ESP32S3 || SLAVE_IDF_TARGET_ESP32C5 || SLAVE_IDF_TARGET_ESP32C61
int "SPI HD Clock Freq (MHz)"
default 40 if SLAVE_IDF_TARGET_ESP32C2 || SLAVE_IDF_TARGET_ESP32C3 || SLAVE_IDF_TARGET_ESP32S2 || SLAVE_IDF_TARGET_ESP32S3 || SLAVE_IDF_TARGET_ESP32C5 || SLAVE_IDF_TARGET_ESP32C61
range $(ESP32XX_SPI_HD_CLK_FREQ_RANGE_MIN) $(ESP32XX_SPI_HD_CLK_FREQ_RANGE_MAX)
help
"Optimize CLK by increasing till host practically can support"
config ESP_HOSTED_SPI_HD_CLK_FREQ
int
default ESP_HOSTED_SPI_HD_FREQ_ESP32C6 if SLAVE_IDF_TARGET_ESP32C6
default ESP_HOSTED_SPI_HD_FREQ_ESP32XX if SLAVE_IDF_TARGET_ESP32C2 || SLAVE_IDF_TARGET_ESP32C3 || SLAVE_IDF_TARGET_ESP32S2 || SLAVE_IDF_TARGET_ESP32S3 || SLAVE_IDF_TARGET_ESP32C5 || SLAVE_IDF_TARGET_ESP32C61
help
"Optimize CLK by increasing till host practically can support"
config ESP_HOSTED_SPI_HD_TX_Q_SIZE
int "ESP to Host queue size"
default 20
help
Very small tx queue will lower ESP -- SPI Half-duplex --> Host data rate
config ESP_HOSTED_SPI_HD_RX_Q_SIZE
int "Host to ESP queue size"
default 20
help
Very small RX queue will lower ESP <-- SPI Half-duplex -- Host data rate
config ESP_HOSTED_SPI_HD_CHECKSUM
bool "Checksum ENABLE/DISABLE"
default y
help
ENABLE/DISABLE software checksum
endmenu
menu "UART Configuration"
depends on ESP_HOSTED_UART_HOST_INTERFACE
choice ESP_HOSTED_UART_RESET_GPIO_CONFIG
bool "RESET GPIO Config"
default ESP_HOSTED_UART_RESET_ACTIVE_HIGH
help
"If Active High, High->Low->High will trigger reset (Low will trigger reset)
If Active Low, Low->High->Low will trigger reset (High will trigger reset)"
config ESP_HOSTED_UART_RESET_ACTIVE_HIGH
bool "RESET: Active High"
config ESP_HOSTED_UART_RESET_ACTIVE_LOW
bool "RESET: Active Low"
endchoice
config ESP_HOSTED_UART_PORT
int "UART Port to Use"
default 1
range 0 2 if IDF_TARGET_ESP32
range 0 1 if IDF_TARGET_ESP32C2 || IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32C5 || IDF_TARGET_ESP32C6
range 0 2 if IDF_TARGET_ESP32C61
range 0 1 if IDF_TARGET_ESP32S2
range 0 2 if IDF_TARGET_ESP32S3
range 0 4 if IDF_TARGET_ESP32P4
help
Select UART Port to Use. Do not select the UART Port used for console output (if enabled)
config ESP_HOSTED_UART_TX_RANGE_MIN
int
default 14 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 0
config ESP_HOSTED_UART_TX_RANGE_MAX
int
default 14 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 100
config ESP_HOSTED_UART_PIN_TX
int "TX GPIO number"
default 13 if IDF_TARGET_ESP32
default 5 if IDF_TARGET_ESP32C2 || IDF_TARGET_ESP32C3
default 14 if IDF_TARGET_ESP32C5
default 21 if IDF_TARGET_ESP32C6
default 5 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
default 14 if IDF_TARGET_ESP32P4
default 12 if IDF_TARGET_ESP32H2
range ESP_HOSTED_UART_TX_RANGE_MIN ESP_HOSTED_UART_TX_RANGE_MAX
help
GPIO used for UART TX
config ESP_HOSTED_UART_RX_RANGE_MIN
int
default 15 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 0
config ESP_HOSTED_UART_RX_RANGE_MAX
int
default 15 if ESP_HOSTED_P4_DEV_BOARD_FUNC_BOARD && SLAVE_IDF_TARGET_ESP32C6
default 100
config ESP_HOSTED_UART_PIN_RX
int "RX GPIO number"
default 12 if IDF_TARGET_ESP32
default 4 if IDF_TARGET_ESP32C2 || IDF_TARGET_ESP32C3
default 13 if IDF_TARGET_ESP32C5
default 20 if IDF_TARGET_ESP32C6
default 4 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
default 15 if IDF_TARGET_ESP32P4
default 22 if IDF_TARGET_ESP32H2
range ESP_HOSTED_UART_RX_RANGE_MIN ESP_HOSTED_UART_RX_RANGE_MAX
help
GPIO used for UART RX
config ESP_HOSTED_UART_BAUDRATE
int "Baud Rate"
default 921600
range 9600 3500000
help
Baud Rate to Use. Make sure Hardware supports the rate. Standard rates are 9600, 19200, 38400, 57600, 115200, 460800, 921600
config ESP_HOSTED_UART_NUM_DATA_BITS
int "Number of Data Bits"
default 8
range 5 8
help
Number of Data Bits to use
choice ESP_HOSTED_UART_PRIV_PARITY
bool "Parity"
config ESP_HOSTED_UART_PRIV_PARITY_NONE
bool "None"
config ESP_HOSTED_UART_PRIV_PARITY_EVEN
bool "Even"
config ESP_HOSTED_UART_PRIV_PARITY_ODD
bool "Odd"
endchoice
config ESP_HOSTED_UART_PARITY
int
default 0 if ESP_HOSTED_UART_PRIV_PARITY_NONE
default 1 if ESP_HOSTED_UART_PRIV_PARITY_EVEN
default 2 if ESP_HOSTED_UART_PRIV_PARITY_ODD
choice ESP_HOSTED_UART_PRIV_STOP_BITS
bool "Number of Stop Bits"
config ESP_HOSTED_UART_PRIV_STOP_BITS_1
bool "1"
config ESP_HOSTED_UART_PRIV_STOP_BITS_1_5
bool "1.5"
config ESP_HOSTED_UART_PRIV_STOP_BITS_2
bool "2"
endchoice
config ESP_HOSTED_UART_STOP_BITS
int
default 0 if ESP_HOSTED_UART_PRIV_STOP_BITS_1
default 1 if ESP_HOSTED_UART_PRIV_STOP_BITS_1_5
default 2 if ESP_HOSTED_UART_PRIV_STOP_BITS_2
config ESP_HOSTED_UART_GPIO_RESET_SLAVE
int "GPIO pin for Reseting slave ESP"
default 54 if IDF_TARGET_ESP32P4
default 42 if IDF_TARGET_ESP32S3
default 5
help
GPIO pin for Resetting ESP SDIO slave device. Should be connected to RST/EN of ESP SDIO slave device.
config ESP_HOSTED_UART_TX_Q_SIZE
int "Tx Queue Size"
default 5
help
UART rates are low, so large queue sizes are not required
config ESP_HOSTED_UART_RX_Q_SIZE
int "Rx Queue Size"
default 5
help
UART rates are low, so large queue sizes are not required
config ESP_HOSTED_UART_CHECKSUM
bool "UART checksum ENABLE/DISABLE"
default y
help
ENABLE/DISABLE software UART checksum
endmenu
menu "Common Slave Reset Strategy"
choice ESP_HOSTED_SLAVE_RESET_STRATEGY
bool "When to reset the slave device"
default ESP_HOSTED_SLAVE_RESET_ON_EVERY_HOST_BOOTUP
help
Select Select when to reset the slave
config ESP_HOSTED_SLAVE_RESET_ON_EVERY_HOST_BOOTUP
bool "Reset slave on every host bootup"
help
Reset the slave device every time the host boots up. This ensures a clean
transport state and prevents any inconsistent states, but causes
the slave to reboot every time.
config ESP_HOSTED_SLAVE_RESET_ONLY_IF_NECESSARY
bool "Reset slave only if necessary"
depends on ESP_HOSTED_SDIO_HOST_INTERFACE
help
Only reset the slave if initialization fails. This reduces slave
reboots but assumes the slave interface is in a consistent state.
If initialization fails, the host will assume the slave is in an
inconsistent or deinitialized state and will reset it.
Note: This option is only available for SDIO transport.
endchoice
config ESP_HOSTED_HOST_RESTART_NO_COMMUNICATION_WITH_SLAVE
bool "Enable host auto-restart on communication failure"
depends on ESP_HOSTED_SLAVE_RESET_ONLY_IF_NECESSARY
default y
help
Enable host to automatically restart if it fails to establish communication with the slave.
When enabled, the host will reset itself to recover the connection if the slave
becomes non-responsive for the configured timeout period. This acts as a safeguard
in case the slave does not issue the first event on the transport line.
config ESP_HOSTED_HOST_RESTART_NO_COMMUNICATION_WITH_SLAVE_TIMEOUT
depends on ESP_HOSTED_HOST_RESTART_NO_COMMUNICATION_WITH_SLAVE
int "Communication failure timeout (seconds)"
default 5
help
Maximum time in seconds that the host will wait for a response from the slave
before triggering an automatic restart. If no communication is established within
this period, the host will reset itself to recover the connection.
endmenu
config ESP_HOSTED_GPIO_SLAVE_RESET_SLAVE
int
default ESP_HOSTED_SPI_GPIO_RESET_SLAVE if ESP_HOSTED_SPI_HOST_INTERFACE
default ESP_HOSTED_SDIO_GPIO_RESET_SLAVE if ESP_HOSTED_SDIO_HOST_INTERFACE
default ESP_HOSTED_SPI_HD_GPIO_RESET_SLAVE if ESP_HOSTED_SPI_HD_HOST_INTERFACE
default ESP_HOSTED_UART_GPIO_RESET_SLAVE if ESP_HOSTED_UART_HOST_INTERFACE
config ESP_HOSTED_RESET_GPIO_ACTIVE_LOW
bool
default n if ESP_HOSTED_SDIO_RESET_ACTIVE_HIGH || ESP_HOSTED_SPI_RESET_ACTIVE_HIGH || ESP_HOSTED_SPI_HD_RESET_ACTIVE_HIGH || ESP_HOSTED_UART_RESET_ACTIVE_HIGH
default y if ESP_HOSTED_SDIO_RESET_ACTIVE_LOW || ESP_HOSTED_SPI_RESET_ACTIVE_LOW || ESP_HOSTED_SPI_HD_RESET_ACTIVE_LOW || ESP_HOSTED_UART_RESET_ACTIVE_LOW
menu "Bluetooth Support"
comment "Following options must be set before this option can be enabled"
depends on !BT_ENABLED || BT_CONTROLLER_ONLY || (BT_NIMBLE_ENABLED && (BT_NIMBLE_TRANSPORT_UART || BT_CONTROLLER_ENABLED)) || (BT_BLUEDROID_ENABLED && BT_CONTROLLER_ENABLED)
comment "'Component config->Bluetooth' must be enabled"
depends on !BT_ENABLED
comment "'Component config->Bluetooth->Host' must be enabled"
depends on BT_ENABLED && BT_CONTROLLER_ONLY
comment "'Component config->Bluetooth->Controller' must be disabled"
depends on BT_ENABLED && BT_CONTROLLER_ENABLED
comment "'Component config->Bluetooth->NimBLE Options->Host-controller Transport->Uart Transport' must be disabled"
depends on BT_NIMBLE_ENABLED && BT_NIMBLE_TRANSPORT_UART
if BT_ENABLED && BT_BLUEDROID_ENABLED && !BT_CONTROLLER_ENABLED
config ESP_HOSTED_ENABLE_BT_BLUEDROID
bool "Enable Hosted Bluedroid Bluetooth support"
default n
help
Enable Bluetooth Support for Bluedroid via Hosted
choice ESP_HOSTED_BLUEDROID_HCI_TYPE
bool "BT Bluedroid HCI Type"
default ESP_HOSTED_BLUEDROID_HCI_VHCI
depends on ESP_HOSTED_ENABLE_BT_BLUEDROID
help
Selects the HCI to use
config ESP_HOSTED_BLUEDROID_HCI_VHCI
bool "VHCI"
help
Bluetooth data is sent through the selected transport layer
endchoice
endif
if BT_ENABLED && BT_NIMBLE_ENABLED && !BT_CONTROLLER_ENABLED && !BT_NIMBLE_TRANSPORT_UART
config ESP_HOSTED_ENABLE_BT_NIMBLE
bool "Enable Hosted Nimble Bluetooth support"
default n
help
Enable Bluetooth Support via Hosted
choice ESP_HOSTED_NIMBLE_HCI_TYPE
bool "BT Nimble HCI Type"
default ESP_HOSTED_NIMBLE_HCI_VHCI
depends on ESP_HOSTED_ENABLE_BT_NIMBLE
help
Selects the HCI to use
config ESP_HOSTED_NIMBLE_HCI_VHCI
bool "VHCI"
help
Bluetooth data is sent through the selected transport layer
endchoice
endif
endmenu
menu "Task defaults"
config ESP_HOSTED_RPC_TASK_STACK
int "RPC task stack size"
default 4096
config ESP_HOSTED_DFLT_TASK_STACK
int "Hosted default task size"
default 3072
endmenu
config ESP_HOSTED_ENABLE_ITWT
bool "Enable iTWT support"
depends on SLAVE_SOC_WIFI_HE_SUPPORT
default y
help
Enable Wi-Fi iTWT (individual Target Wake Time) APIs on Host. Using the API, Host
can instruct the co-processor to negotiate specific wake and sleep schedules with
the access point (AP) for lower power consumption.
config ESP_HOSTED_ENABLE_DPP
bool "Enable Wi-Fi Easy Connect (DPP)"
default n
help
Enable Wi-Fi Easy Connect (DPP) support
config ESP_HOSTED_DPP_URI_LEN_MAX
int "Maximum length of URI used to generate QR code in Wi-Fi Easy Connect"
depends on ESP_HOSTED_ENABLE_DPP
default 255
help
URIs used to generate the QR code should be less than this length.
Increase this value if the received URI can be larger
config ESP_HOSTED_USE_MEMPOOL
bool "Cache allocated memory like mempool - helps to reduce malloc calls"
default y
help
Cache allocated memory - reduces number of malloc calls
config ESP_HOSTED_MAX_SIMULTANEOUS_SYNC_RPC_REQUESTS
int "Maximum number of simultaneous synchronous RPC Request"
default 5
help
Sets the maximum number of simultaneous synchronous RPC Requests.
(Synchronous RPC Request: each sending task waits for the response.)
Usually, the host application may send up to 3 simultaneous RPC requests to the slave.
Increase this number if you need to send more simultaneous RPC requests.
Note: the slave will only process one RPC request (sync and async) at a time
config ESP_HOSTED_MAX_SIMULTANEOUS_ASYNC_RPC_REQUESTS
int "Maximum number of simultaneous asynchronous RPC Request"
default 5
help
Sets the maximum number of simultaneous asynchronous RPC Requests.
(Asynchronous RPC Request: each sending task registers a callback to get the response.)
Usually, the host application may send up to 3 simultaneous RPC requests to the slave.
Increase this number if you need to send more simultaneous RPC requests.
Note: the slave will only process one RPC request (sync and async) at a time
config ESP_HOSTED_CLI_ENABLED
bool "Enable CLI Shell"
default y
help
Only registers ESP-Hosted cli commands to the existing CLI session opened earlier by other components than esp-hosted
config ESP_HOSTED_CLI_NEW_INSTANCE
depends on ESP_HOSTED_CLI_ENABLED
bool "Create new instance & do not re-use existing session if any"
default n
help
Starts a new CLI instance when enabled & registers esp hosted as well.
Refrain from enabling this option, if your example already creates cli session, for example, iperf example.
menu "Debug Settings"
config ESP_HOSTED_RAW_THROUGHPUT_TRANSPORT
bool "RawTP: Transport level throughput debug test"
default n
help
Find max transport performance which helps to assess stability of porting done
choice ESP_HOSTED_RAW_THROUGHPUT_DIRECTION
bool "RawTP: Send data from:"
depends on ESP_HOSTED_RAW_THROUGHPUT_TRANSPORT
config ESP_HOSTED_RAW_THROUGHPUT_TX_TO_SLAVE
bool "Host to Slave"
help
Sends data from Host to Slave
config ESP_HOSTED_RAW_THROUGHPUT_RX_FROM_SLAVE
bool "Slave to Host"
help
Sends data from Slave to Slave
config ESP_HOSTED_RAW_THROUGHPUT_BIDIRECTIONAL
bool "Bidirectional"
help
Sends data in both directions
endchoice
config ESP_HOSTED_RAW_TP_HOST_TO_ESP_PKT_LEN
depends on ESP_HOSTED_RAW_THROUGHPUT_TRANSPORT
int "RawTP: Host to ESP packet size"
range 1 1500
default 1460
config ESP_HOSTED_RAW_TP_REPORT_INTERVAL
depends on ESP_HOSTED_RAW_THROUGHPUT_TRANSPORT
int "RawTP: periodic duration to report stats accumulated"
default 5
config ESP_HOSTED_PKT_STATS
bool "Transport level packet stats"
default n
help
On comparing with slave packet stats helps to understand any packet loss at hosted
config ESP_PKT_STATS_INTERVAL_SEC
depends on ESP_PKT_STATS
int "Packet stats reporting interval (sec)"
default 30
endmenu
menu "Data path options"
config ESP_HOSTED_HOST_TO_ESP_WIFI_DATA_THROTTLE
bool "Report WiFi queue utilization to host"
default y
help
Proactively drop Host->slave Wi-Fi data when Slave Wi-Fi is under load
Slave Wi-Fi may drop ingress bursty or higher than capacity packets.
To have synchronous way of packet dropped for application,
Host will throttle incoming data if the slave datapath Rx load is high
config ESP_HOSTED_PRIV_WIFI_TX_SPI_HIGH_THRESHOLD
depends on ESP_HOSTED_HOST_TO_ESP_WIFI_DATA_THROTTLE && ESP_HOSTED_SPI_HOST_INTERFACE
int "High threshold to report host to drop data when wifi highly loaded"
range 0 100
default 90
help
Host will throttle incoming data if the slave datapath Rx load goes beyond this threshold
0 value will disable this function
config ESP_HOSTED_PRIV_WIFI_TX_SDIO_HIGH_THRESHOLD
depends on ESP_HOSTED_HOST_TO_ESP_WIFI_DATA_THROTTLE && ESP_HOSTED_SDIO_HOST_INTERFACE
int "High threshold to report host to drop data when wifi highly loaded"
range 0 100
default 80
help
Host will throttle incoming data if the slave datapath Rx load goes beyond this threshold
0 value will disable this function
config ESP_HOSTED_PRIV_WIFI_TX_SPI_HD_HIGH_THRESHOLD
depends on ESP_HOSTED_HOST_TO_ESP_WIFI_DATA_THROTTLE && ESP_HOSTED_SPI_HD_HOST_INTERFACE
int "High threshold to report host to drop data when wifi highly loaded"
range 0 100
default 80
help
Host will throttle incoming data if the slave datapath Rx load goes beyond this threshold
0 value will disable this function
config ESP_HOSTED_PRIV_WIFI_TX_UART_HIGH_THRESHOLD
depends on ESP_HOSTED_HOST_TO_ESP_WIFI_DATA_THROTTLE && ESP_HOSTED_UART_HOST_INTERFACE
int "High threshold to report host to drop data when wifi highly loaded"
range 0 100
default 80
help
Host will throttle incoming data if the slave datapath Rx load goes beyond this threshold
0 value will disable this function
config ESP_HOSTED_TO_WIFI_DATA_THROTTLE_HIGH_THRESHOLD
depends on ESP_HOSTED_HOST_TO_ESP_WIFI_DATA_THROTTLE
int
default ESP_HOSTED_PRIV_WIFI_TX_SPI_HIGH_THRESHOLD if ESP_HOSTED_SPI_HOST_INTERFACE
default ESP_HOSTED_PRIV_WIFI_TX_SDIO_HIGH_THRESHOLD if ESP_HOSTED_SDIO_HOST_INTERFACE
default ESP_HOSTED_PRIV_WIFI_TX_SPI_HD_HIGH_THRESHOLD if ESP_HOSTED_SPI_HD_HOST_INTERFACE
default ESP_HOSTED_PRIV_WIFI_TX_UART_HIGH_THRESHOLD if ESP_HOSTED_UART_HOST_INTERFACE
config ESP_HOSTED_TO_WIFI_DATA_THROTTLE_LOW_THRESHOLD
depends on ESP_HOSTED_HOST_TO_ESP_WIFI_DATA_THROTTLE
int "Low threshold to report host to stop dropping data"
range 0 ESP_HOSTED_TO_WIFI_DATA_THROTTLE_HIGH_THRESHOLD
default 60
help
Once the Wi-Fi is no more stressed, data throttling would be stopped, once slave Wi-Fi load
is lower than this threshold
endmenu
config ESP_HOSTED_DECODE_WIFI_RESERVED_FIELD
bool "Copy Wi-Fi configuration reserved field values"
default n
help
ESP-IDF Wi-Fi structures contain reserved bitmask values.
Enable this option if you want to copy these values between host and co-processor.
It is usually safe to ignore these reserved values.
config ESP_HOSTED_NETWORK_SPLIT_ENABLED
bool "Enable Network Split: Shared IP address between host and slave"
default n
help
Enables the LWIP stack on the slave to process its own set of ports,
alongside the host stack. Helps split network traffic and allows
background tasks on the slave, even when the host is in low-power mode.
menu "LWIP port config"
depends on ESP_HOSTED_NETWORK_SPLIT_ENABLED
menu "Host side (remote) LWIP port config"
config LWIP_TCP_LOCAL_PORT_RANGE_START
int "Host TCP start port"
default 49152
help
Host side TCP start port. Slave defaults to 61440
Slave range: 61440-65535
Host range: 49152-61439
config LWIP_TCP_LOCAL_PORT_RANGE_END
int "Host TCP end port"
default 61439
help
Host side TCP end port. Slave defaults to 65535
Slave range: 61440-65535
Host range: 49152-61439
config LWIP_UDP_LOCAL_PORT_RANGE_START
int "Host UDP start port"
default 49152
help
Host side UDP start port. Slave defaults to 61440
Slave range: 61440-65535
Host range: 49152-61439
config LWIP_UDP_LOCAL_PORT_RANGE_END
int "Host UDP end port"
default 61439
help
Host side UDP end port. Slave defaults to 65535
Slave range: 61440-65535
Host range: 49152-61439
endmenu
menu "Slave side (remote) LWIP port config"
config LWIP_TCP_REMOTE_PORT_RANGE_START
int "Slave TCP start port"
default 61440
help
Slave side TCP start port. Host defaults to 49152
Slave range: 61440-65535
Host range: 49152-61439
config LWIP_TCP_REMOTE_PORT_RANGE_END
int "Slave TCP end port"
default 65535
help
Slave side TCP end port. Host defaults to 61439
Slave range: 61440-65535
Host range: 49152-61439
config LWIP_UDP_REMOTE_PORT_RANGE_START
int "Slave UDP start port"
default 61440
help
Slave side UDP start port. Host defaults to 49152
Slave range: 61440-65535
Host range: 49152-61439
config LWIP_UDP_REMOTE_PORT_RANGE_END
int "Slave UDP end port"
default 65535
help
Slave side UDP end port. Host defaults to 61439
Slave range: 61440-65535
Host range: 49152-61439
endmenu
endmenu
config ESP_HOSTED_HOST_POWER_SAVE_ENABLED
bool "Allow host to power save"
depends on SOC_LIGHT_SLEEP_SUPPORTED || (SOC_DEEP_SLEEP_SUPPORTED && SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP)
default n
config ESP_HOSTED_HOST_DEEP_SLEEP_ALLOWED
bool "Allow host to enter deep sleep. Slave will wakeup host using GPIO"
depends on ESP_HOSTED_HOST_POWER_SAVE_ENABLED && (SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP && SOC_DEEP_SLEEP_SUPPORTED)
default y
help
Allow host to deep sleep for highest power saving. Only RTC memory and RTC GPIOs remain
powered during deep sleep. Slave will wake up host using a GPIO when needed. Host must
configure a valid RTC GPIO for wakeup. Deep sleep provides maximum power savings but has
longer wakeup time compared to light sleep.
menu "Host Power Save Configuration"
depends on ESP_HOSTED_HOST_DEEP_SLEEP_ALLOWED
config ESP_HOSTED_HOST_WAKEUP_GPIO
int "Host in: Host Wakeup GPIO"
default 5 if C2_C5_MODULE_SUB_BOARD
default 6 if IDF_TARGET_ESP32P4 && SLAVE_CHIPSET_ESP32C6 && !ESP_HOSTED_SPI_HD_HOST_INTERFACE
default 4 if IDF_TARGET_ESP32P4 && SLAVE_CHIPSET_ESP32C6 && ESP_HOSTED_SPI_HD_HOST_INTERFACE
default 6 if IDF_TARGET_ESP32P4 && SLAVE_CHIPSET_ESP32C5
default 6 if IDF_TARGET_ESP32P4 && !SLAVE_CHIPSET_ESP32C6 && !SLAVE_CHIPSET_ESP32C5
default 1 if IDF_TARGET_ESP32C3
default -1
range -1 15 if IDF_TARGET_ESP32P4
help
GPIO number to use for host wakeup from sleep.
Set to -1 to disable GPIO wakeup.
Only RTC GPIOs are supported for deep-sleep-wakeup.
choice PRIV_HOST_WAKEUP_GPIO_LEVEL
bool "Host Wakeup GPIO Level"
default PRIV_HOST_WAKEUP_GPIO_LEVEL_HIGH
config PRIV_HOST_WAKEUP_GPIO_LEVEL_HIGH
bool "High"
config PRIV_HOST_WAKEUP_GPIO_LEVEL_LOW
bool "Low"
endchoice
config ESP_HOSTED_HOST_WAKEUP_GPIO_LEVEL
int
default 1 if PRIV_HOST_WAKEUP_GPIO_LEVEL_HIGH
default 0 if PRIV_HOST_WAKEUP_GPIO_LEVEL_LOW
help
GPIO level to use for host wakeup from sleep.
Set to 0 to use low level, set to 1 to use high level.
endmenu
# Config Validation
if ESP_HOSTED_HOST_DEEP_SLEEP_ALLOWED
if !ESP_HOSTED_SDIO_HOST_INTERFACE && ESP_HOSTED_SLAVE_RESET_ONLY_IF_NECESSARY
comment "Error: Invalid configuration. Slave reset is mandatory for non SDIO transports"
endif
if ESP_HOSTED_HOST_WAKEUP_GPIO = -1
comment "Error: Host wake-up GPIO is mandatory"
endif
if ESP_HOSTED_SLAVE_RESET_ONLY_IF_NECESSARY && !ESP_HOSTED_HOST_RESTART_NO_COMMUNICATION_WITH_SLAVE
comment "Recommended to set up 'auto-restart of host' if communication with slave fails"
endif
endif
endmenu
Reference in New Issue View Git Blame Copy Permalink